Wiring Diagram Remote Control

Schematic Description :

This Circuit Require voltage 12 -26 Volt. Good Voltage use is 16 Volt , Because its not too small and not too big Voltage. If use voltage that is to large it will quickly damage the IC. And if use voltage that is to small it will make less than maximum sound output.

Datasheet IC  AN5265

Vcc                = 12-26 V

Pout               = 2,3 W

RL                  = 16 Ohm

Ft                   = 40hz - 18Khz

Icco                = 9,5mA

Package         = SIP2-9

Manufactered =  MATSUSHITA